Used Paper Mill Equipment for Sale

Capacity: 32m³; Capacity: 32m³; Cellulose pulper with discharge pump (Andritz/Schorch)

Capacity: 80m³; Capacity: 80m³; Cellulose pulper with 2 discharge pumps, working platform, pipe work

Capacity: 27m³; Capacity: 27m³; Cellulose pulper (Voith) with discharge pumps, working platform, pipe work

10 m / 1.150mm, Balancer for dewiring device or pneumatic wire cutter

Capacity: 33m³; Capacity: 33m³; (Voith) with agitator and discharge pumps

10 m / 1.150mm, Balancer for dewiring device or pneumatic wire cutter

Capacity: 33m³; Capacity: 33m³; (Voith) with agitator and discharge pumps

Capacity 25 m³, breakage feeding chain conveyor, guillotine, B 2,500 mm, gas separator, electric hoist, Demag, load capacity 2,500 kg The production layout is divided in two complete paper production lines (PM4 and PM5) with Paper Machine – Coating Machine – 2 Super Calanders and Rewinders/Slitters on each line.

Primary screen with 0.15 mm slot; Primary screen with 0.15 mm slot

with working stage, switching cabinet

with working stage, switching cabinet

with working stage, switching cabinet

with working stage, switching cabinet

with working stage, switching cabinet

with working stage, switching cabinet

with working stage, separate control

Consisting of: 2 water tanks (10m³), water pump (ABS), drive motor, working platform, pipework

Electronic pusher, discharge hopper, base frame

Technical details available on request.

Technical details available on request.

Cone Cyclone, for extracting wire residues and impurities

for removing wire, size 40/50

Technical details available on request.

Technical details available on request.

Cone Cyclone, for extracting wire residues and impurities

Technical details available on request.

Cone Cyclone, for extracting wire residues and impurities

Hydro cyclone for heavy contaminant separation; Hydro cyclone for heavy contaminant separation

HydraScreen BW1000; HydraScreen BW1000

HydraScreen BW1000; HydraScreen BW1000

HydraScreen BW1000; HydraScreen BW1000

Secondary pressure screen; Secondary pressure screen

Secondary pressure screen; Secondary pressure screen

Three high-density cleaner units for heavy contaminant separation in paper stock preparation.

High consistency refiner; High consistency refiner

High consistency reject refiner; High consistency reject refiner

Capacity: 4 units; Low consistency refiners, 4 units; Low consistency refiners, 4 units

Modern stock-preparation refiner for paper and tissue applications; final motor, plate and included auxiliary scope available in technical file.

Three units; 500 kW each; approx. 750 rpm; tissue stock preparation and recycled-fiber refining duty; dismantled and stored on site.

Lubrication oil panel for refiner 50-60; Lubrication oil panel for refiner 50-60

High consistency refiner; High consistency refiner

High consistency refiner; High consistency refiner

15 discs; disc diameter approx. 5,700 mm; white-water flow approx. 15,500 L/min; inlet solids approx. 9.5 g/L; indicative application range approx. 300–400 t/day, subject to furnish and operating conditions.

Installed with working platform and pipework; indicative application range approx. 100–200 t/day, subject to furnish and operating conditions.

Double-wire press; working width approx. 2,150 mm; designed for pulp dewatering and consistency increase; installed condition.

Double-wire press; working width approx. 2,950 mm; suitable for high-capacity pulp dewatering; installed condition.

Thickener package with two bow sieves; suitable for fiber thickening and water recovery; final mechanical scope and dismantling interface available on request.

Industrial screw press for stock dewatering and consistency increase; mechanical inspection and final supply scope available on request.

With 2 bow sieves

With bow sieves

Dewatering screw for solids/fiber dewatering; Dewatering screw for solids/fiber dewatering

Recent industrial stock agitators for paper-mill chests and process applications; quantity and motor scope subject to final release list.

A deep bunker (70 cubic meters per hour) is loaded with wheel loaders for the automatic transport of the timber. The conveyor belts are equipped with intermediate gearboxes and monitoring systems.

Width: 1.000 mm; Working width: 1.000 mm; Length: 30.000 mm; Conveyor belt with discharge chutes to the continuous grinders

Width: 1.000 mm; Working width: 1.000 mm; Length: 30.000 mm; Conveyor belt with discharge chutes to the continuous grinders

4 Vibration Sieves with conveyor belt and hammer mill

5 Vibration Sieves with conveyor belt and hammer mill

in various designs, different performance levels

in various designs, different performance levels, Manufacturer: Sulzer et al.

in various designs, different performance levels, Manufacturer: Sulzer et al.

Technical details available on request.

Size HPW microfilter, water- and fabric tank, textile disc filter cover, 4 feed pumps

Complete bleaching plant with vats, pumps, presses, pipework, control system etc.

With pump, agitator, cleaning device, capacity 80m³

10 m, conveyor chain, balancer m de-wiring tool, working platform

20 m, 1.400mm with centralised lubrication system

Capacity: 100m³; Capacity: 100m³; with agitator and drain pump

Capacity: 100m³; Capacity: 100m³; with agitator and drain pump

with screw conveyor, knocker, pipe/drogue screw conveyor, belt ascending conveyor 25m / 570mm

12 m, 1.150mm

consisting of: roll pusher, plate conveyor belt, L 5,000 mm, alignment rails, guillotine, hydr. driven, cutting width 1,700 mm, hydraulic unit, 40 t, roll lift, pressure capacity 60 - 245 bar, safety fence, light barrier

11 m, 1.150mm

12 m, 1.150mm

12 m, 1.150mm

Conveyor RTS 500x4600; Conveyor RTS 500x4600

Conveyor RT 500x4600; Conveyor RT 500x4600

Conveyor RT 500x4600; Conveyor RT 500x4600

Reject overflow conveyor; Reject overflow conveyor

Seal water panel; Seal water panel

Pressurized impregnation conveyor; Pressurized impregnation conveyor

Width: max. 4.000 mm; Working width: max. 4.000 mm; Throughput: up to 200 cubic metre / hour; Saw Blades: 3 x Ø 1.600 mm; Cutting width: 1.000 mm; The circular wood saw comes complete with feeding and sorting table (up to 4.000mm), separation belts, control room in a container, Siemens PLC and camera surveillance for the complete debarking process.

Drum diameter: 7.000 mm; Drum length: 27.000 mm

The sorting plant with 2 stations, PLC and camera surveillance is used to separate debarked from non-debarked wood.

Motor / Gearbox: Ansaldo / Voith; Grindstone Diameter: 1.900 mm; Grinding Performance: 6,5-7,2 cubic metre / hour; Consisting of wood filling chute, conveyor chains, grindstone, trough with wooden grinder, sharpening gun, splash water and outlet. Grinding zone 1m³

Motor / Gearbox: EMZ 3.000 kW / Voith; Grindstone Diameter: 1.900 mm; Grinding Performance: 6,5-7,2 cubic metre / hour; Consisting of wood filling chute, conveyor chains, grindstone, trough with wooden grinder, sharpening gun, splash water and outlet. Grinding zone 1m³

Motor / Gearbox: VEM 3.000 kW / Voith; Grindstone Diameter: 1.900 mm; Grinding Performance: 6,5-7,2 cubic metre / hour; Consisting of wood filling chute, conveyor chains, grindstone, trough with wooden grinder, sharpening gun, splash water and outlet. Grinding zone 1m³

Motor / Gearbox: VEM 3.000 kW / Voith; Grindstone Diameter: 1.900 mm; Grinding Performance: 6,5-7,2 cubic metre / hour; Consisting of wood filling chute, conveyor chains, grindstone, trough with wooden grinder, sharpening gun, splash water and outlet. Grinding zone 1m³

Motor / Gearbox: VEM 3.000 kW / Voith; Grindstone Diameter: 1.900 mm; Grinding Performance: 6,5-7,2 cubic metre / hour; Consisting of wood filling chute, conveyor chains, grindstone, trough with wooden grinder, sharpening gun, splash water and outlet. Grinding zone 1m³

Motor / Gearbox: VEM 3.000 kW / Voith; Grindstone Diameter: 1.900 mm; Grinding Performance: 6,5-7,2 cubic metre / hour; Consisting of wood filling chute, conveyor chains, grindstone, trough with wooden grinder, sharpening gun, splash water and outlet. Grinding zone 1m³

Motor / Gearbox: Ansaldo 3.000 kW / Voith; Grindstone Diameter: 1.900 mm; Grinding Performance: 6,5-7,2 cubic metre / hour; Consisting of wood filling chute, conveyor chains, grindstone, trough with wooden grinder, sharpening gun, splash water and outlet. Grinding zone 1m³

Motor / Gearbox: Ansaldo 3.000 kW / Voith; Grindstone Diameter: 1.900 mm; Grinding Performance: 6,5-7,2 cubic metre / hour; Consisting of wood filling chute, conveyor chains, grindstone, trough with wooden grinder, sharpening gun, splash water and outlet. Grinding zone 1m³

Motor / Gearbox: Ansaldo 3.000 kW / Voith; Grindstone Diameter: 1.900 mm; Grinding Performance: 6,5-7,2 cubic metre / hour; Consisting of wood filling chute, conveyor chains, grindstone, trough with wooden grinder, sharpening gun, splash water and outlet. Grinding zone 1m³

Motor / Gearbox: Ansaldo 3.000 kW / Voith; Grindstone Diameter: 1.900 mm; Grinding Performance: 6,5-7,2 cubic metre / hour; Consisting of wood filling chute, conveyor chains, grindstone, trough with wooden grinder, sharpening gun, splash water and outlet. Grinding zone 1m³

Motor / Gearbox: Ansaldo 3.000 kW / Voith; Grindstone Diameter: 1.900 mm; Grinding Performance: 6,5-7,2 cubic metre / hour; Consisting of wood filling chute, conveyor chains, grindstone, trough with wooden grinder, sharpening gun, splash water and outlet. Grinding zone 1m³

Complete bleaching plant with vats, pumps, presses, pipework, control system etc.

Side entry plug feeder; Side entry plug feeder

Ribbon feeder / feed screw RF 25 inch; Ribbon feeder / feed screw RF 25 inch

Width: 1.000 mm; Working width: 1.000 mm; Drum cross-layer for deflecting and separating logs, with control stand and video monitoring

with working stage, separate control

Motor: Ansaldo 745 kW

Motor: Ansaldo 745 kW

Motor: Ansaldo 745 kW

Motor: Ansaldo 745 kW

Stainless Steel 50 – 100 m³ Fabric

Motor: Velden 588 kW

Motor: Velden 588 kW

Motor: Garbe-Lameier 630 kW (1974)

Motor: Elin 630 kW

80 m³ Fabric, made by Edel (1979)

Motor: Siemens 1.150 kW

Motor: Ansaldo 1.250 kW

Motor: Ansaldo 1.250 kW

Motor: Ansaldo 1.250 kW

Motor / Gearbox: 630 kW

Motor / Gearbox: VEM 630 kW /Kumera

Capacity: 50m³; Capacity: 50m³; On studwork, above B31/B32

Technical details available on request.

Technical details available on request.

9 m / 1.150mm

Technical details available on request.

Feed hopper, winding screw, working platform

Motor / Gear Box: Schorch 630 kW / Renk

Motor / Gear Box: Siemens 700 kW / Renk

Motor / Gear Box: Schorch 700 kW / Renk

Motor / Gear Box: ABB

Motor / Gear Box: Schorch 630 kW / Renk

Motor / Gear Box: Schorch 630 kW / Tacke

Motor / Gear Box: Schorch 630 kW / Tacke

Deinking and fiber-cleaning flotation equipment; associated stock preparation components available subject to final scope verification.

Throughput: 300t p.d.; Stainless steel Covering, w. vacuum pumps

Three heavy-duty liquid ring vacuum pumps; ABB motors up to 450 kW; high-vacuum duty for tissue and paper machine dewatering; performance curves and service records available subject to final file release.

Consisting of additional vacuum pump, pump drive, screw conveyor from disc filter, downpipe

Capacity: 284 m³ / h; Capacity: 284 m³ / h; Conveyor line coming from the disc filter, downpipe, vacuum pump made by Andritz

Fluting, Medium and Wellenstoff; 90–200 gsm; operating speed 170–360 m/min; approx. 5 TPH; maximum reel width 2,300 mm; 16 cast-iron and 5 steel dryers; rewinder up to 1,200 m/min.

Fluting, Medium and Wellenstoff; 90–200 gsm; operating speed 240–420 m/min; approx. 6.5 TPH; maximum reel width 2,500 mm; rewinder up to 1,200 m/min; operational spares included.

Saleable width approx. 4,400 mm; 90–150 gsm; design speed up to 1,500 m/min; 39 dryers Ø1,500 mm; inclined size press; pope reel; double-drum winder; OCC stock preparation available.

Saleable width approx. 5,150 mm; 90–200 gsm; operating speed approx. 650 m/min; recent production approx. 380 TPD; shutdown in late 2025; major auxiliaries and OCC line available.

Paper width at reel approx. 5,475 mm; maximum operating speed approx. 950 m/min; design speed 700 m/min stated in dossier; 40–145 gsm; net production approx. 170,000 t/year; Voith ModulJet headbox and Duo-D former.

Main rewinder and log formation line; stated target speed 600 m/min; 380/220 V, 50 Hz; embossing and lamination referenced; Optima LBV3-R modules, Cassoli packaging units and Langhammer conveying/control sections.

Tissue shoe press; design line load up to approx. 170 kN/m; machine speed capability up to approx. 2,000 m/min; roll diameter approx. 1,100 mm.

To produce coating colours for further processing in CM4/CM5, consisting of Kaolin dissolution plant, Pigment recovery plant (GEA Westfalia), Colour preparation plant (GAW), vats, tanks, bunkers, pumps etc.

Width: 7,500 mm; Working width of the paper: 7,500 mm; Speed (max.): 1,420 m/min; Operating speed 1,420 m/min, consisting of: Unwinding, coating unit 1, carbon blade coater (2015), hot air drying, cylinder contact drying, coating unit 2, manufactured by Voith/Sulzer, type Jetflow F, with Voith Web inspection system, Parsytec web monitoring system, Working speed max. 1,600 m/min, Infrared drying, cylinder contact drying, machine bonnet, manufactured by Voith/Kofra, reel, working width 7,500 mm

Width: 7,300 mm; Working width of the paper: 7,300 mm; Speed (max.): 1,600 m/min; working width 7,300 mm, basis weight 70 - 113 g/m², coated paper, working speed max. 1,600 m/min, consisting of: Unwinder (speed coater), automatic splice device, pre-coater 1 + 2, rebuilt 1999, film applicator, coating application 5 – 12 g/m²/side, coating drying, w. infrared radiator, hot air dryer, cylinder drying contact drying, top coat coater 3 + 4, Rebuilt in 2001, Voith/Sulzer, type Jetflow F, coating application 7 - 12 g/m²/side, MOL calender, 2 elastic rollers, rewinding, unwinding device, f. scrap

Coated fine paper; working width 5,400 mm; net production approx. 250,000 t/year; maximum operating speed approx. 1,300 m/min; design speed 1,500 m/min; four coating stations, IR drying, online and offline calendars, reel and slitter rewinder.

Manufactured by Schuler, rail-bound, load capacity 40 tonnes for 1 full reel spool or 3 empty reels, 3 in total, reel spool drive, on calender, paper machine and coating machine

Width: 7.500 cm; Working width of the paper: 7.500 cm; working width 7,500 mm , for calendering base paper, coated paper, 12 rolls, operating speed 800 m/min, 6 paper rolls, 6 chilled cast iron rolls, 8-fold roll magazine, integrated passenger lift, web cutter, reel spool magazine, web inspection system, control system, manufactured by Siemens, type PLC

Width: 7.500 cm; Working width of the paper: 7.500 cm; working width 7,500 mm, automatic splicing device, order no. 21803970, for calendering base paper, coated paper, 12 rolls, operating speed 800 m/min, 6 paper rolls, 6 chilled cast iron rolls, 8-fold roll magazine, integrated personnel lift, web cutter, reel spool magazine, web inspection system, Voith reel, built 1996, control system, manufactured by Siemens, type PLC

Width: 7.300 cm; Working width of the paper: 7.300 cm; working width 7,300 mm, max. working speed 820 m/min, basis weight 70 - 115 g/m², final weight, 2 steel rollers, with deflection compensation, rollers with cotton cover, spreader roller, web inspection system, control system, manufactured by Siemens, type PLC, interchangeable frame, with 8 spare rollers, man basket

Width: 7.300 cm; Working width of the paper: 7.300 cm; working width 7,300 mm, automatic splicing device, for calendering base paper, coated paper, 12 rolls, operating speed 800 m/min, 6 paper rolls, 6 chilled cast iron rolls, 8-roll magazine, integrated personnel lift, web cutter, reel spool magazine, web inspection system, control system, manufactured by Siemens, type PLC

Width: 7.400 cm; Working width of the paper: 7.400 cm; 24 reel stands, working width 7,400 mm, control room, soundproof cabin, PC control, reel support, for 3 full reels, reel support, for 3 empty reels

Width: 7.400 cm; Working width of the paper: 7.400 cm; working width 7,400 mm, speed max. 2. 400 m/min, web width max. 3,000 mm, roll Ø max. 1,500 mm, approx. 10 individual rewinding stations, with centre winder, support units, reel spool unwinding, pre-edging, slitter section, control room, soundproof cabin, video monitoring, PC control system

Width: 7.400 cm; Working width of the paper: 7.400 cm; Speed. max. 2,200 m/min, double unwinding, slitting section, support roller, reel spool magazine, 6 individual rewinding stations, 2 rewinds out of operation, finished roll max. width 3,600 - 4,400 mm, Ø. approx. 1,400 mm, piece pulper on the ground floor, control room, Siemens control system, type Siemadyn D, Soundproof cabin for control room, 16 Dienes rolling knives, driven

Width: 7.500 cm; Working width of the paper: 7.500 cm; Edge trimmer, driven measuring /guide roller, rewinder, control room w. soundproof cabin, control panel, PLC control

Width: 7.500 cm; Working width of the paper: 7.500 cm; Tambour tray, control stand, soundproof cabin, Parsytec, Web inspection system, measuring roller, trimming knife, Dines, 2-fold

Width: 7.400 cm; Working width of the paper: 7.400 cm; 21 reel stands, hold-down device, knife section, control stand, control system, manufactured by Siemens, type Simatic HMI, video monitoring system, reel spool storage rack for 2 reels, with turning device, connected machine pulper, manufactured by PIA, connected to Trancell reel conveyor system, automatic core feed, safety fence, laser barrier With Double girder bridge crane, steel, built 2006, load capacity 30/30/8 t, load capacity 60 t for automatic loading/unloading of reels

2 elevators, floor chain conveyors, transfer units, pushers, for transporting finished cut rolls from the paper machine and slitter rewinders to roll packaging and dispatch over 2 floors, central control station with cross transport trolley, Trancel, for 1 tambour, rail-bound, self-propelled

roll width 2,160 mm, 2 unwinds, 4 unwind stations each, one above the other, 8 layers, 5 rotary knives, Dienes, automatic sheet stacking, load capacity 4,000 kg, working platform, control system, Siemens, type Simatic OP3, chain conveyor belt, embedded in the floor, for loading the unwinding stations, with loading crane (electric hoist 30), Ernst Kröger GmbH, load capacity 2 x 2,500 kg,

max. working width 2,160 mm, 8 unwinds, 4 and 4 arranged one above the other, chain feed belt for roller transport, loading crane, Ernst Kröger GmbH, load capacity 2 x 2. 500 kg, SN 12671, built 1991, roller lifting beam, 5 rotary knives, Dines, cover/sound protection bonnet, automatic pallet stacking, control, Siemens, type OP3, PC control, Demag trolley, load capacity 2,000 kg, tool/roller change, working platform

working width 2,160 mm, 8 unwinding stations, autom. reel loading, autom. reel crane (crane 010, manufactured by Spieß-Krane, year 2004, load capacity 5,500 kg, reel feeding system, tensioning/splicing system, autom. empty core removal, automatic reel unloading system, automatic reel loading system Roller crane (crane 010), manufactured by Spieß-Krane, year 2004, load capacity 5,500 kg, roll feeding system, clamping/splicing system, automatic empty tube removal, by automatic crane (crane 011), manufactured by Spieß-Krane, year 2004, load capacity 5,500 kg, storage in storage rack, 5 rotary knives, Dienes, automatic stacking/palletising, control, Siemens, type Simatic HMI, PC, single girder bridge crane, Demag, SN 04235920, year 2004, type EUKE, load capacity 2,000 kg, wire rope hoist, span 4,000 mm, automatic interlayer insertion robot, Dücker Antriebstechnik, pallet station, automatic stacking, working platform

working width 1,800 mm, automatic destacking type 3551, SN 515-1098, table load approx. 300 kg, automatic stacking type 3543, SN 514-1098, table load 300 kg

load capacity 350 kg, machine weight 11,000 kg, working width 2,200 mm, control system, manufactured by NUM, PC, small format loading station, type 2552, large format loading station, type 5553, gantry robot, for destacking, destacking station, type 5544, safety fence, light barrier, piece conveyor belt, conveyor width 2,000 mm, feed hopper, on chain conveyor belt, conveyor width 800 mm, to piece container

10 unwind stations; 10 pockets; up to 140 reams/min; line speed up to 350 m/min; wrappers and palletizing equipment available subject to final scope.

for paper rolls from W 2,200 mm, automatic wrapping paper rewinding, paper width 500 mm, manual lid application, labelling, automatic transfer to unloading belt for dispatch, video monitoring system, control system, PLC, weighing cell

consisting of: Lowering ramp, centring station, automatic lidding system, magazine, automatic reel deposit, winding line, winding station, 12 unwinding units, 2 Nordson gluing units, reel width 500 - 2,620 mm, wrapping paper width max. 3,300 mm, 2 heating plates for outer lids, for gluing the outer lid labelling station, automatic application, pressing via Gentry robot, outfeed to the shipping gantry crane, for loading and unloading. Application, pressing via Gentry robot, outfeed to the dispatch gantry crane, for feeding the wrapping paper handling system, Rolf, load capacity 2 x 2,000 kg, inner lid magazine with 10 compartments, control room, control station, PLC control, video monitoring system, soundproof cabin

pallet loading station, sheet removal, 2 gluing stations, wrapping station, folding station, 3 wrapping paper trolleys, 2 gluing units, Nordson, autom. Stacking, on pallet, transfer station, 2-fold, to pallet packaging system, manual labelling, 2 label printers, control system, Siemens, Simatic type, 2 scissor lifts, electric wire rope hoist, Demag, load capacity 3,000 kg, roller traverse, for wrapping paper roll change

consisting of: 2-fold roller conveyor, conveying width 900 mm, Hywema scissor lift, coming from single-grid machine, roller conveyor folding piece transfer unit, roller conveyor to alignment unit, cross transport trolley, manual pallet loading station, made by Thiessen, max. pallet dimensions 1,200 x 800 mm, lifting unit, roller conveyor belt, conveying width 1,300 mm, for stack centring, made by Reka, type P281, built 2013, SN 4300, for vertical alignment. 1,200 x 800 mm, lifting unit, roller conveyor belt, conveyor width 1,300 mm, for stack centring, make Reka, type P281, year 2013, SN 4300, for vertical alignment, labelling/alignment station, 6-axis robot, make ABB, type IRB6640, SN 6640-104425, year 2013, control cabinet, touch panel, 2 label printing stations, m. automatic feeding to the robot removal station, automatic glue application, horizontal wrapping unit, Thiessen, vertical pallet wrapping system, with turntable, Nütro, 4 roller conveyors, conveyor width 1,300 mm, L 2,000 mm, vertical pallet wrapping system, Thiessen, packaging line, 2 shrink-wrapping systems, ring burner, Thiessen, type MSK Packaging Systems, type MSK MSK Verpackungssysteme, type MSK281, built 1985, natural gas driven, roller conveyor, plate conveyor belt, extraction system, transfer to loading station, shrink tunnel, Schwank, type SM I 18-L, built 1991, SN 18487, gas-fired, output 140 kW, consumption 10 kWh/m³, stacking press, Thiessen, outfeed roller conveyor, to loading point. System control Siemens S7 (in 2014)

Capacity: 190,000 tons p.a.; Width: 7,500 mm; Working width of the paper: 7,500 mm; Speed (max.): 1,200 m/min; Capacity: 190,000 tons p.a.; Basis weights: Coated: 39-90 g/m², raw: 25-55g/m²

Capacity: 260,000 tons p.a.; Width: 7,420 mm; Working width of the paper: 7,420 mm; Speed (max.): 1,350 m/min; Capacity: 260,000 tons p.a.; Basis weights: Coated: 57-110 g/m², raw: 40-70g/m²

Width: 3.500 cm; Working width of the paper: 3.500 cm; 6 reels, 6 rolling knives, control room, soundproofed cabin, control system, make Siemens, type SPS

Width: 2.600 cm; Working width of the paper: 2.600 cm; 3 rotary knives, 4 roller blocks, 4 counter holders, unwinding, control room, soundproof cabin, control system, Siemens, type SPS Simatic

to supply the piece pulper, consisting of: pulper (B355), manufactured by Voith, receiver tank (B359), wet separator, dilution water vat, discharge vat, external vat, pipework, valves, control system, manufactured by Siemens, type Simatic Touch

magazine table, core lift, remaining roll unwinder, conveyor belt to pulper, core table, for unwinding empty cores, control system, Siemens, Simatic type, roll Ø max. 400 mm, roll width max. 2,300 mm, min. 400 mm, core Ø max. outside 190 mm, min. outside 90 mm, roll weight max. 125 kg, knife unit 16-fold

Rated output approx. 19.5–22.9 MW; live steam flow 125 t/h; inlet pressure 114–126 bar; generator 28.4 MVA at 10.5 kV; Renk gearbox and control systems.

Approx. 265 kW; inlet approx. 11.5 bar abs; outlet approx. 5 bar abs; 400 V, 50 Hz generator; governor and synchronization scope available.

20 t/h saturated steam boiler; gas/oil dual fuel; Weishaupt burners; economizer and associated boiler package.

Approx. 14.5 t/h steam and 1 MW electrical output; 23.5 bar / 400°C; 10 MW boiler, AVK generator, water treatment, flue-gas cleaning and electrical systems.

Steam Capacity: 50 t / h (19,7 bar / 370°C); Electrical capacity: 7,3 MW @ 90 t / h steam (Turbine); Fuel: 98% natural gas / 2% biogas; Water treatment based on ion exchangers, designed for 15 t/h demineralized water replenishment and approx. 100 t/h condensate treatment / purification Water Chamber boiler 3 Capacitx 39 MWh each (117 MWh total)

Measuring device for tear strength, tensile strength, material density, whiteness, grinding degrees, with integrated weighing cell, control unit, air conditioning system

Measuring device for tear strength, tensile strength, material density, whiteness, grinding degrees, with integrated weighing cell, control unit, air conditioning system

McNett design, 4 fraction containers, 4 fraction sieves

4 unwinders, PC control, evaluation system, configured for various measuring operations

4 unwinders, PC control, evaluation system, configured for various measuring operations

max. grinding length 8,000 mm, suction, 2 mounting devices for steady rests, grinding emulsion preparation, Neuhäuser

grinding length 8,000 mm, tailstock, steady rest, face plate, Ø 1,000 mm, control, Siemens, type Sinumerik PLC, control panel, touch screen, spindle passage 100 mm, suction pipe

grinding length 8,000 mm, tailstock, steady rest, face plate, Ø 1,250 mm, control

grinding length 8,000 mm, tailstock, steady rest, face plate, Ø 1,000 mm, control, Siemens, type Sinumerik PLC, control panel, touch screen, spindle passage 100 mm,

core deposit area, 20 stanchions, automatic core removal system by gantry crane, automatic core deposit, in transport trolley, automatic core saw, cutting unit type, SN 13490, 2006, feeding belt, feeder type, SN 201, automatic removal system, direct material feed to slitter rewinder, 7x m. Elevator system, or alternatively via conveyor system to core transport trolley, control system, Siemens, type SPS7, touch screen, safety fence, video monitoring system, dust extraction system, Donaldson, type Torit OCE, power 715 kW, filter system, Donaldson, dust ejector with double girder overhead travelling crane, manufactured by Stahl, year 2006, load capacity 8,000 kg, double hoist, load traverse for sleeve packages, manufactured by JJ Gruppen, SN 233348, year 2006, load capacity 3,000 kg, dead weight 1,680 kg, adjustable in width, crane span 8,000 mm, remote control

(V 509 C/25E tower), saw blade Ø 300 mm, pneum. counter support, infeed frame, L 2,500 mm, outfeed frame 1,000 mm, 2 mobile dust extractors

Infeed frame, L 4,000 mm, counter support, outfeed frame, 4,000 mm, with rollers, mobile dust extraction system, Al-Ko, type Mobiljet 200

More than 33,000 unused parts; approx. 60 metric tons; professionally stored; suitable for paper mills with multiple machines or centralized maintenance operations.