Used WOHLENBERG & MEUSER Lathes and VOITH Roll Grinder
Photo note: The first two images show the WOHLENBERG machine and control details. The third image shows available tooling/accessories and is not presented as an overall view of the VOITH grinder. Further installed-condition photos are shared with qualified buyers.
Roll-workshop technical comparison
Compare catalogue dimensions and machining limits
Roll width, centre distance, swing and permissible load describe different limits. Match the required machining operation to the individual machine and its supports.
| Equipment | Year / update | Length dimension | Other documented geometry / controls | Verification required |
|---|---|---|---|---|
| MR100162 · WOHLENBERG V1250 | 1980 | Catalogue roll width 8,000 mm; separate supplier listing: 10,000 mm between centres | Swing over bed 1,250 mm; over carriage 970 mm; spindle bore 100 mm | Catalogue roll width differs from distance between centres. Allowable load and roll/support arrangement require verification. |
| MR100163 · VOITH | 1970 | Catalogue roll width 8,000 mm | Catalogue roll diameter 1,250 mm | Catalogue-listed geometry; verify current configuration, load and usable grinding envelope. |
| MR100164 · MEUSER & Co | Refurbished 2018; original manufacture year unconfirmed | Catalogue roll width 8,000 mm | Siemens Sinumerik touchscreen; spindle bore 100 mm | Catalogue describes turning/grinding. Confirm present grinding attachment, tooling and allowable load in writing. |
The sold 1980 VOITH grinder remains excluded. A roll diameter or catalogue length alone does not establish suitability for a heavy workpiece.
Worldwide delivery
Worldwide delivery to your nominated international port can be quoted, subject to route confirmation, asset-specific eligibility and the agreed written scope.
Three roll-workshop machines are listed as available: the WOHLENBERG V1250 lathe (MR100162), the VOITH roll grinder (MR100163) and the MEUSER & Co lathe (MR100164). Review each machine against the intended roll dimensions, weight and machining duty before arranging an inspection.
Availability correction: the previously listed VOITH roll grinder from 1980 (MR100161), has been sold. The available VOITH grinder is the separate 1970 machine (MR100163).
Maria Roboter GmbH coordinates technical clarification, inspection, controlled dismantling, preservation, export packing and international delivery within the agreed written scope. Availability remains subject to prior sale and written reconfirmation.
WOHLENBERG V1250 HEAVY-DUTY ROLL LATHE — MR100162
- Reference: MR100162
- Manufacturer / model: WOHLENBERG V1250
- Machine type: Heavy-duty roll lathe / roll-turning machine
- Year: 1980
- Catalogue roll width: 8,000 mm
- Distance between centres: 10,000 mm in the separate supplier listing; a different length measure from catalogue roll width
- Listed swing: 1,250 mm over bed; 970 mm over carriage. Verify the complete roll and support arrangement.
- Faceplate: approximately Ø 1,000 mm
- Spindle bore: 100 mm
- Control: Siemens Sinumerik PLC with operator panel and touchscreen
- Listed equipment: headstock, tailstock, steady rest, extraction system and related available accessories; final included scope to be confirmed in writing
- Status: available; installed-condition inspection by arrangement
Catalogue roll width and distance between centres are different dimensions. Neither alone establishes the permissible roll weight or the full usable machining envelope. Send the roll drawing, overall dimensions, journal details and gross weight for verification against the machine and its supports.
VOITH ROLL GRINDER — MR100163
- Reference: MR100163
- Manufacturer: VOITH
- Machine type: Roll grinding machine
- Year: 1970
- Catalogue roll width: 8,000 mm
- Catalogue roll diameter: 1,250 mm; current grinding envelope and support arrangement require verification
- Status: available; inspection by arrangement
- Technical review: confirm maximum roll diameter, grinding length, permissible load, controls, supports and included accessories against this machine's technical file
This is a separate machine from the sold 1980 VOITH grinder. Specifications and accessories of MR100161 must not be assumed to apply to MR100163.
MEUSER & CO LATHE — MR100164
- Reference: MR100164
- Manufacturer: MEUSER & Co
- Machine type: Lathe
- Refurbishment: 2018
- Catalogue roll width: 8,000 mm
- Spindle bore: 100 mm
- Catalogue control: Siemens Sinumerik with touchscreen
- Original manufacturing year: not yet verified
- Status: available; inspection by arrangement
- Technical review: confirm the machining envelope, permissible workpiece weight, controls, included tooling and whether a grinding attachment is included
SOLD MACHINE — MR100161
The VOITH roll grinder manufactured in 1980 (MR100161), has been sold and is excluded from the available selection above. Enquire about MR100163 for the separate available VOITH grinder.
INSPECTION, DISMANTLING & EXPORT SCOPE
A joint technical inspection can be arranged before purchase. The agreed dismantling method is designed to protect machine geometry and future reinstallation: machine beds are not to be cut or separated without prior written approval. Bases, rails, shims and levelling parts can be retained, connections match-marked and photographed, and machined surfaces protected for transport.
- Technical file and available nameplate information
- Installed-condition inspection for qualified buyers
- Method statement, risk assessment, LOTO and draining coordination
- Non-destructive dismantling, match-marking and photo documentation
- Corrosion protection, VCI preservation and ISPM-15 export timber
- CTU-compliant loading, packing list and package/container photographs
- International transport and delivery options according to the agreed Incoterm
COMMERCIAL STATUS
Maria Roboter GmbH is currently reviewing qualified interest, including offers from Asia. Priority will be given to the first buyer who completes technical qualification, confirms financial capacity and accepts the written commercial scope. Competitive terms are available for a prompt, executable transaction. Availability is subject to prior sale.
The exact industrial location and confidential documentation are disclosed after buyer qualification and, where required, a strict NDA. Maria Roboter GmbH acts as an independent industrial-equipment supplier and is not affiliated with the OEMs. All trademarks remain the property of their respective owners.
FREQUENTLY ASKED QUESTIONS
Which roll-workshop machines are listed as available?
The available selection comprises the WOHLENBERG V1250 lathe (MR100162, 1980), the VOITH roll grinder (MR100163, 1970) and the MEUSER & Co lathe (MR100164, refurbished in 2018; original manufacturing year unverified). Availability is subject to prior sale and written reconfirmation.
Has the 1980 VOITH roll grinder been sold?
Yes. The 1980 VOITH grinder (MR100161), has been sold. The separate available VOITH grinder is the 1970 machine (MR100163).
Can the machines be purchased separately?
Individual-machine and combined enquiries can be considered. The final included scope and accessories are confirmed in writing before contract.
Do the catalogue dimensions confirm that my roll will fit?
No. The WOHLENBERG catalogue lists 8,000 mm roll width, while the separate supplier listing gives 10,000 mm between centres. The VOITH catalogue lists 8,000 mm roll width and 1,250 mm roll diameter; the MEUSER catalogue lists 8,000 mm roll width. These figures describe different limits. Roll diameter, weight, journal geometry, supports and the intended machining operation require machine-specific verification.
Is a grinding attachment included with the MEUSER lathe?
The inclusion and specification of a MEUSER grinding attachment remain to be confirmed. Request the technical file and written scope before relying on a combined turning and grinding function.
Can the machines be inspected before purchase?
Yes. An inspection can be arranged for a qualified industrial buyer, subject to current availability, site-access approval and confidentiality requirements.
Does Maria Roboter manage dismantling and worldwide delivery?
Yes. The agreed scope can include controlled dismantling, match-marking, preservation, export packing, loading, documentation and international delivery.
Where are the machines located?
The machines are located at an industrial site in Europe. The exact location is disclosed after qualification and NDA where required.
REQUEST THE TECHNICAL FILE & COMMERCIAL TERMS
Please provide your company name, target country and destination port, the MR reference of interest, roll drawing, overall roll dimensions and gross weight, required machining operation, preferred inspection date and purchasing timeframe. Use the enquiry form below to request the available technical file, further photographs, inspection options and commercial terms.