Maria Roboter · Paper Mill Equipment
Mill Fit Lab
Compare the machine’s published specifications with your mill requirements. Review the process diagram, then draw the installation layout and flag what needs verification.
1. Choose equipment
Technical review
2. Compare specifications
Process diagram
Machine-family schematic. Select a point to see what to verify.
Your mill requirements
Enter the figures you know. Use the unit shown beside each field.
Technical checks
Review these results with the machine’s technical file and your process data.
3. Draw the installation layout
Enter measured dimensions
Available room
Overall machine size
Enter both lengths and widths for a scaled top view. Add heights for a side view.
Example dimensions. Choose Use my measurements to work with your own values.
Refine the layout
Service access, position and obstacles
X and Y are measured from the upper-left of the top view. The service extension starts at the machine’s right edge at 0° and rotates with the machine.
Additional process and project data
Share the operating duty and target if available. Our team checks process fit against the original equipment data.
Send to engineering
Request a measurement or a project review
Attach the equipment reference, mill requirements, measurements and marked issues. Review the message and submit the Webador enquiry below.